Know Your Environment. Protect Your Health.

UTILITY

Valle Lindo Homes

location

Walla Walla County, Washington

serves

787

source

Groundwater

data through

2025

EWG 2026 Data Set

Overview

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Washington State Department of Health, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2026- March 2026), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Contaminants Detected

Bromodichloromethane

Potential Effect: cancer

This Utility: 0.633 ppb

11x

EWG's Health Guideline: 0.06 ppb

Bromodichloromethane

Bromodichloromethane, one of the total trihalomethanes (TTHMs), is formed when chlorine or other disinfectants are used to treat drinking water. Bromodichloromethane and other disinfection byproducts increase the risk of cancer and may cause problems during pregnancy. Click here to read more about disinfection byproducts.

Bromodichloromethane was found at 11 times above EWG's Health Guideline.

EWG Health Guideline

0.06 ppb or less

This Utility

0.633 ppb

National Average

5.87 ppb

State Average

1.82 ppb

Health Risks

The EWG Health Guideline of 0.06 ppb for bromodichloromethane was based on the California Office of Environmental Health Hazard Assessment's public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer and harm to fetal growth and development.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

Bromoform

Potential Effect: cancer

This Utility: 3.16 ppb

6.3x

EWG's Health Guideline: 0.5 ppb

Bromoform

Bromoform, one of the total trihalomethanes (TTHMs), is formed when chlorine or other disinfectants are used to treat drinking water. Bromoform and other disinfection byproducts increase the risk of cancer and may cause problems during pregnancy. Click here to read more about disinfection byproducts.

Bromoform was found at 6.3 times above EWG's Health Guideline.

EWG Health Guideline

0.5 ppb or less

This Utility

3.16 ppb

National Average

1.46 ppb

State Average

0.254 ppb

Health Risks

The EWG Health Guideline of 0.5 ppb for bromoform is based on the California Office of Environmental Health Hazard Assessment's public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer, harm to reproduction and child development, and change to fetal growth and development .

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

Dibromoacetic acid

Potential Effect:

This Utility: 0.957 ppb

32x

EWG's Health Guideline: 0.03 ppb

Dibromoacetic acid

Dibromoacetic acid, one of the group of five haloacetic acids regulated by federal standards, is formed when chlorine or other disinfectants are used to treat drinking water. Haloacetic acids and other disinfection byproducts increase the risk of cancer and may cause problems during pregnancy. Click here to read more about disinfection byproducts.

Dibromoacetic acid was found at 32 times above EWG's Health Guideline.

EWG Health Guideline

0.03 ppb or less

This Utility

0.957 ppb

National Average

1.16 ppb

State Average

0.108 ppb

Health Risks

The EWG Health Guideline of 0.03 ppb for dibromoacetic acid was defined by the California Office of Environmental Health Hazard Assessment's public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer and harm to fetal growth and development.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

Dibromochloromethane

Potential Effect: cancer

This Utility: 2.18 ppb

22x

EWG's Health Guideline: 0.1 ppb

Dibromochloromethane

Dibromochloromethane, one of the total trihalomethanes (TTHMs), is formed when chlorine or other disinfectants are used to treat drinking water. Dibromochloromethane and other disinfection byproducts increase the risk of cancer and may cause problems during pregnancy. Click here to read more about disinfection byproducts.

Dibromochloromethane was found at 22 times above EWG's Health Guideline.

EWG Health Guideline

0.1 ppb or less

This Utility

2.18 ppb

National Average

3.6 ppb

State Average

0.635 ppb

Health Risks

The EWG Health Guideline of 0.1 ppb for dibromochloromethane was based on the California Office of Environmental Health Hazard Assessment's public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer and harm to fetal growth and development.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

Haloacetic acids (HAA5)

Potential Effect: cancer

This Utility: 1.44 ppb

14x

EWG's Health Guideline: 0.1 ppb

Haloacetic acids (HAA5)

Haloacetic acids are formed when disinfectants such as chlorine are added to tap water. The group of five haloacetic acids regulated by federal standards includes monochloroacetic acid, dichloroacetic acid, trichloroacetic acid, monobromoacetic acid and dibromoacetic acid.

Haloacetic acids (HAA5) was found at 14 times above EWG's Health Guideline.

EWG Health Guideline

0.1 ppb or less

This Utility

1.44 ppb

Legal Limit

60 ppb

National Average

16.1 ppb

State Average

15 ppb

Health Risks

The EWG Health Guideline of 0.1 ppb for the group of five haloacetic acids, or HAA5, was defined in a peer-reviewed scientific study by EWG and represents a one-in-a-million lifetime cancer risk level. This health guideline protects against cancer.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

Nitrate

Potential Effect: cancer

This Utility: 1.90 ppm

14x

EWG's Health Guideline: 0.14 ppm

Nitrate

Nitrate, a fertilizer chemical, frequently contaminates drinking water due to agricultural and urban runoff, and discharges from municipal wastewater treatment plants and septic tanks. Excessive nitrate in water can cause oxygen deprivation in infants and increase the risk of cancer. Click here to read more about nitrate.

Nitrate was found at 14 times above EWG's Health Guideline.

EWG Health Guideline

0.14 ppm or less

This Utility

1.9 ppm

Legal Limit

10 ppm

National Average

0.814 ppm

State Average

0.844 ppm

Health Risks

The EWG health guideline of 0.14 parts per million, or ppm, for nitrate and nitrite is based on the equivalent health guideline for nitrate, as defined in a peer-reviewed scientific study by EWG. This guideline represents a one-in-one-million annual cancer risk level.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppm = parts per million

Pollution Sources

Agriculture

Runoff & Sprawl

Naturally Occurring

Filtering Options

Reverse Osmosis

Ion Exchange

Total trihalomethanes (TTHMs)

Potential Effect: cancer

This Utility: 5.99 ppb

40x

EWG's Health Guideline: 0.15 ppb

Total trihalomethanes (TTHMs)

Trihalomethanes are cancer-causing contaminants that form during water treatment with chlorine and other disinfectants. The total trihalomethanes group includes four chemicals: chloroform, bromodichloromethane, dibromochloromethane and bromoform.

Total trihalomethanes (TTHMs) was found at 40 times above EWG's Health Guideline.

EWG Health Guideline

0.15 ppb or less

This Utility

5.99 ppb

Legal Limit

80 ppb

National Average

28.9 ppb

State Average

19.5 ppb

Health Risks

The health guideline of 0.15 parts per billion, or ppb, for the group of four trihalomethanes, or THM4/TTHM, was defined in a peer-reviewed scientific study by EWG and represents a one-in-one-million lifetime cancer risk level.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

Includes chemicals detected in 2023-2025 for which annual utility averages exceeded an EWG-selected health guideline established by a federal or state public health authority.


† HAA5 is a contaminant group that includes monochloroacetic acid, dichloroacetic acid, trichloroacetic acid, monobromoacetic acid and dibromoacetic acid. HAA9 is a contaminant group that includes the chemicals in HAA5 and bromochloroacetic acid, bromodichloroacetic acid, chlorodibromoacetic acid and tribromoacetic acid. TTHM is a contaminant group that includes bromodichloromethane, bromoform, chloroform and dibromochloromethane.

Chloroform

This Utility: 0.0250 ppb

EWG's Health Guideline: 0.4 ppb

Chloroform

Chloroform, one of the total trihalomethanes (TTHMs), is formed when chlorine or other disinfectants are used to treat drinking water. Chloroform and other disinfection byproducts increase the risk of cancer and may cause problems during pregnancy.

How your levels compare

EWG Health Guideline

0.4 ppb or less

This Utility

0.025 ppb

National Average

16.2 ppb

State Average

15.4 ppb

Health Risks

The EWG Health Guideline of 0.4 ppb for chloroform was based on the California Office of Environmental Health Hazard Assessment's public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer and harm to fetal growth and development.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

DCPA di-acid degradate

This Utility: 33.5 ppb

No EWG Health Guideline

DCPA di-acid degradate

DCPA di-acid degradate is a residue of the herbicide dacthal, or DCPA, which is used for urban, household and agricultural applications. Dacthal is a possible human carcinogen whose use was limited by the EPA in 2005 due to concerns about water contamination.

How your levels compare

This Utility

33.5 ppb

National Average

0.0372 ppb

State Average

0.0415 ppb

EWG Health Guideline

Not yet determined

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Agriculture

Runoff & Sprawl

Filtering Options

Activated Carbon

Reverse Osmosis

Manganese

This Utility: 21.7 ppb

EWG's Health Guideline: 100 ppb

Manganese

Manganese is a naturally occurring element that is common in food and drinking water. Excessive manganese exposures may impair children's attention, memory and intellectual capacity. Click here to read more about manganese.

How your levels compare

EWG Health Guideline

100 ppb or less

This Utility

21.7 ppb

National Average

8.37 ppb

State Average

11.1 ppb

Health Risks

The EWG Health Guideline of 100 ppb for manganese was defined by the state of Minnesota as a health risk limit, the concentration of a contaminant that can be consumed with little or no risk to health. This health guideline protects against harm to the brain and nervous system.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2018-2025.

ppb = parts per billion

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Ion Exchange

Includes chemicals detected in 2021-2023 for which annual utility averages were lower than an EWG-selected health guideline established by a federal or state public health authority; chemicals detected under the EPA's Unregulated Contaminant Monitoring Rule (UCMR 4) program in 2017 to 2020 (and subsequent testing when available), for which annual utility averages exceeded a health guideline established by a federal or state public health authority.

Other Contaminants Tested

✕

Chemicals tested for but not detected:

1,1,1,2-Tetrachloroethane, 1,1,1-Trichloroethane, 1,1,2,2-Tetrachloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethane, 1,1-Dichloroethylene, 1,1-Dichloropropene, 1,2,3-Trichlorobenzene, 1,2,3-Trichloropropane, 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene, 1,2-Dibromo-3-chloropropane (DBCP), 1,2-Dichloroethane, 1,2-Dichloropropane, 1,3,5-Trimethylbenzene, 1,3-Dichloropropane, 11-chloroeicosafluoro-3-oxaundecane-1-sulfonic aci, 2,2-Dichloropropane, 2,4,5-T, 2,4,5-TP (Silvex), 2,4-D, 2,4-DB, 4,4'-dde, 4,8-dioxa-3H-perfluorononanoic acid (ADONA), 4:2 Fluorotelomer sulfonate (4:2 FTS), 6:2 Fluorotelomer sulfonate (6:2FTS), 8:2 Fluorotelomer sulfonate (8:2FTS), 9-chlorohexadecafluoro-3-oxanone-1-sulfonic acid (, Acenaphthylene, Acifluorfen (Blazer), Alachlor (Lasso), Aldrin, Anthracene, Antimony, Arsenic, Atrazine, Bentazon (Basagran), Benzene, Benzoic acid, Benzo[a]anthracene, Benzo[a]pyrene, Benzo[b]fluoranthene, Benzo[k]fluoranthene, Beryllium, Bromacil, Bromobenzene, Bromochloroacetic acid, Bromochloromethane, Bromomethane, Butachlor, Butanoic acid, 2,2,3,3,4,4-hexafluoro-4-(trifluoro, Butyl benzyl phthalate, Cadmium, Carbon tetrachloride, Chloramben, Chlordane, Chloroethane, Chloromethane, Chrysene, cis-1,2-Dichloroethylene, cis-1,3-Dichloropropene, Cyanide, Dalapon, Di(2-ethylhexyl) adipate, Di(2-ethylhexyl) phthalate, Di-n-butyl phthalate, Dibromomethane, Dicamba, Dichloroacetic acid, Dichlorodifluoromethane, Dichloromethane (methylene chloride), Dichlorprop, Dicofal, Dieldrin, Diethyl phthalate, Dimethyl phthalate, Dinoseb, Endrin, EPTC (Eptam), Ethylbenzene, Ethylene dibromide, Fluorene, Fluoride, Heptachlor, Heptachlor epoxide, Hexachlorobenzene (HCB), Hexachlorobutadiene, Hexachlorocyclopentadiene, Hexafluoropropylene oxide dimer acid (HFPO-DA), Isopropylbenzene, Lindane, m-Dichlorobenzene, Mercury (inorganic), Methoxychlor, Metolachlor, Metribuzin, Molinate, Monobromoacetic acid, Monochloroacetic acid, Monochlorobenzene (chlorobenzene), n-Butylbenzene, n-Propylbenzene, Naphthalene, Nitrite, Nonafluoro-3,6-dioxaheptanoic acid, o-Chlorotoluene, o-Dichlorobenzene, p-Chlorotoluene, p-Dichlorobenzene, p-Isopropyltoluene, Para-para DDT, Pentachlorophenol, Perfluoro(2-ethoxyethane)sulfonic acid, Perfluorobutane sulfonate (PFBS), Perfluorobutanoic acid (PFBA), Perfluorodecanoic acid (PFDA), Perfluorododecanoic acid (PFDoA), Perfluoroheptane sulfonic acid (PFHpS), Perfluoroheptanoic acid (PFHPA), Perfluorohexane sulfonate (PFHXS), Perfluorohexanoic Acid (PFHxA), Perfluorononanoic acid (PFNA), Perfluorooctane sulfonate (PFOS), Perfluorooctanoic acid (PFOA), Perfluoropentane sulfonic acid (PFPeS), Perfluoropentanoic acid (PFPeA), Perfluoroundecanoic acid (PFUnA), Phenanthrene, Picloram, Polychlorinated biphenyls (PCBs), Propachlor, Propanoic acid, 2,2,3,3-tetrafluoro-3-(trifluorome, Pyrene, Radium, combined (-226 & -228), sec-Butylbenzene, Selenium, Silver, Simazine, Styrene, Terbacil, tert-Butylbenzene, Tetrachloroethylene (perchloroethylene), Thallium, Toluene, Toxaphene, trans-1,2-Dichloroethylene, trans-1,3-Dichloropropene, Trichloroacetic acid, Trichloroethylene, Trichlorofluoromethane, Trifluralin, Vinyl chloride, Xylenes (total)

You're viewing EWG's latest annual update: The 2026 Data Set, which includes data through 2025.

Utilities test and report on varying schedules throughout the year, so EWG compiles the results into one annual update.

Find A Filter

Utility: 

Valle Lindo Homes
view utility

Carbon Filters

FILTERS 6 contaminants exceeding guidelines (+2 others)

Can reduce the levels of many common contaminants.

pros

  • Lower upfront cost
  • Reduced maintenance

cons

  • Does not remove all contaminants

Reverse Osmosis

FILTERS 7 contaminants exceeding guidelines (+2 others)

Can reduce the levels of many common contaminants.

pros

  • Most effective

cons

  • Higher upfront cost
  • Requires more maintenance
  • Wastes water

Other Considerations

Ion Exchange

Pros: Softens hard water, Reduces some contaminants

Cons: Doesn’t remove all contaminants

Whole-House Filters

Pros: Useful for reducing radiologicals and TCE

Cons: Expensive to install and maintain, Risk of bacterial contamination

Explore filter options for each contaminant. See which technologies are effective at reducing specific contaminants to help you make an informed decision on the best water treatment solution for your needs.

CONTAMINANTS ABOVE HEALTH GUIDELINES activated carbon reverse osmosis ion exchange
Bromodichloromethane
Bromoform
Dibromoacetic acid
Dibromochloromethane
Haloacetic acids (HAA5)
Nitrate
Total trihalomethanes (TTHMs)
OTHER CONTAMINANTS DETECTED activated carbon reverse osmosis ion exchange
Chloroform
DCPA di-acid degradate
Manganese