Know Your Environment. Protect Your Health.

UTILITY

Kooskooskie Cabin Owners Inc.

location

Walla Walla County, Washington

serves

45

source

Groundwater

data through

2025

EWG 2026 Data Set

Overview

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Washington State Department of Health, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2026- March 2026), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Contaminants Detected

Radium, combined (-226 and -228)

Potential Effect: cancer

This Utility: 0.29 pCi/L

5.9x

EWG's Health Guideline: 0.05 pCi/L

Radium, combined (-226 and -228)

Radium is a radioactive element that causes bone cancer and other cancers. It can occur naturally in groundwater, and oil and gas extraction activities such as hydraulic fracturing can elevate concentrations.

Radium, combined (-226 and -228) was found at 5.9 times above EWG's Health Guideline.

EWG Health Guideline

0.05 pCi/L or less

This Utility

0.29 pCi/L

Legal Limit

5 pCi/L

National Average

0.33 pCi/L

State Average

0.27 pCi/L

Health Risks

EWG applied the health guideline of 0.05 pCi/L, defined by the California Office of Environmental Health Hazard Assessment as a public health goal for radium-226, to radium-226 and radium-228 combined. This health guideline protects against cancer.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2020-2025.

pCi/L = picocuries per liter

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Reverse Osmosis

Ion Exchange

Includes chemicals detected in 2023-2025 for which annual utility averages exceeded an EWG-selected health guideline established by a federal or state public health authority; radiological contaminants detected between 2020 and 2025.

Di(2-ethylhexyl) adipate

This Utility: 0.612 ppb

EWG's Health Guideline: 200 ppb

Di(2-ethylhexyl) adipate

Di(2-ethylhexyl) adipate is used in PVC plastic, plastic wrap and other consumer products. It is released as a pollutant from industrial sources and sewage treatment plants. In studies of laboratory animals, di(2-ethylhexyl) adipate can harm fetal development.

How your levels compare

EWG Health Guideline

200 ppb or less

This Utility

0.612 ppb

Legal Limit

400 ppb

National Average

0.00118 ppb

State Average

0.000284 ppb

Health Risks

The EWG Health Guideline of 200 ppb for di(2-ethylhexyl) adipate was defined by the California Office of Environmental Health Hazard Assessment as a public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against harm to internal organs.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Industry

Runoff & Sprawl

Filtering Options

Activated Carbon

Reverse Osmosis

Fluoride

This Utility: 2.10 ppm

No EWG Health Guideline

Fluoride

Fluoride occurs naturally in surface and groundwater and is also added to drinking water by many water systems to prevent cavities and support oral health in people.

In 2015, the Department of Health and Human Services updated its recommendation of an optimal level of 0.7 parts per million, or ppm, added to drinking water based on the health benefits of tooth decay prevention. Studies have shown that fluoride added to community water systems at this level reduces dental cavities, especially in children.

And studies have conclusively shown that fluoride in toothpaste and mouthwash can also provide these benefits.

How your levels compare

This Utility

2.1 ppm

Legal Limit

4 ppm

National Average

0.485 ppm

State Average

0.318 ppm

EWG Health Guideline

Not yet determined

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppm = parts per million

Pollution Sources

Industry

Treatment Byproducts

Naturally Occurring

Filtering Options

Reverse Osmosis

Manganese

This Utility: 1.48 ppb

EWG's Health Guideline: 100 ppb

Manganese

Manganese is a naturally occurring element that is common in food and drinking water. Excessive manganese exposures may impair children's attention, memory and intellectual capacity. Click here to read more about manganese.

How your levels compare

EWG Health Guideline

100 ppb or less

This Utility

1.48 ppb

National Average

8.37 ppb

State Average

11.1 ppb

Health Risks

The EWG Health Guideline of 100 ppb for manganese was defined by the state of Minnesota as a health risk limit, the concentration of a contaminant that can be consumed with little or no risk to health. This health guideline protects against harm to the brain and nervous system.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2018-2025.

ppb = parts per billion

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Ion Exchange

Nitrate

This Utility: 0.167 ppm

EWG's Health Guideline: 0.14 ppm

Nitrate

Nitrate, a fertilizer chemical, frequently contaminates drinking water due to agricultural and urban runoff, and discharges from municipal wastewater treatment plants and septic tanks. Excessive nitrate in water can cause oxygen deprivation in infants and increase the risk of cancer. Click here to read more about nitrate.

How your levels compare

EWG Health Guideline

0.14 ppm or less

This Utility

0.167 ppm

Legal Limit

10 ppm

National Average

0.814 ppm

State Average

0.844 ppm

Health Risks

The EWG health guideline of 0.14 parts per million, or ppm, for nitrate and nitrite is based on the equivalent health guideline for nitrate, as defined in a peer-reviewed scientific study by EWG. This guideline represents a one-in-one-million annual cancer risk level.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppm = parts per million

Pollution Sources

Agriculture

Runoff & Sprawl

Naturally Occurring

Filtering Options

Reverse Osmosis

Ion Exchange

Includes chemicals detected in 2021-2023 for which annual utility averages were lower than an EWG-selected health guideline established by a federal or state public health authority; chemicals detected under the EPA's Unregulated Contaminant Monitoring Rule (UCMR 4) program in 2017 to 2020 (and subsequent testing when available), for which annual utility averages exceeded a health guideline established by a federal or state public health authority.

Other Contaminants Tested

✕

Chemicals tested for but not detected:

1,1,1,2-Tetrachloroethane, 1,1,1-Trichloroethane, 1,1,2,2-Tetrachloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethane, 1,1-Dichloroethylene, 1,1-Dichloropropene, 1,2,3-Trichlorobenzene, 1,2,3-Trichloropropane, 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene, 1,2-Dibromo-3-chloropropane (DBCP), 1,2-Dichloroethane, 1,2-Dichloropropane, 1,3,5-Trimethylbenzene, 1,3-Dichloropropane, 11-chloroeicosafluoro-3-oxaundecane-1-sulfonic aci, 2,4,5-T, 2,4,5-TP (Silvex), 2,4-D, 2,4-DB, 4,4'-dde, 4,8-dioxa-3H-perfluorononanoic acid (ADONA), 4:2 Fluorotelomer sulfonate (4:2 FTS), 6:2 Fluorotelomer sulfonate (6:2FTS), 8:2 Fluorotelomer sulfonate (8:2FTS), 9-chlorohexadecafluoro-3-oxanone-1-sulfonic acid (, Acenaphthene, Acenaphthylene, Acifluorfen (Blazer), Alachlor (Lasso), Aldrin, Anthracene, Antimony, Arsenic, Atrazine, Bentazon (Basagran), Benzene, Benzoic acid, Benzo[a]anthracene, Benzo[a]pyrene, Benzo[b]fluoranthene, Benzo[g,h,i]perylene, Benzo[k]fluoranthene, Beryllium, Bromacil, Bromobenzene, Bromochloromethane, Bromodichloromethane, Bromoform, Bromomethane, Butachlor, Butanoic acid, 2,2,3,3,4,4-hexafluoro-4-(trifluoro, Butyl benzyl phthalate, Cadmium, Carbon tetrachloride, Chloramben, Chlordane, Chloroform, Chloromethane, Chromium (total), Chrysene, cis-1,2-Dichloroethylene, Cyanazine (Bladex), Cyanide, Dalapon, DCPA di-acid degradate, Di(2-ethylhexyl) phthalate, Di-n-butyl phthalate, Diazinon (Spectracide), Dibenz[a,h]anthracene, Dibromoacetic acid, Dibromochloromethane, Dibromomethane, Dicamba, Dichloroacetic acid, Dichlorodifluoromethane, Dichloromethane (methylene chloride), Dichlorprop, Dicofal, Dieldrin, Diethyl phthalate, Dimethyl phthalate, Dinoseb, Endosulfan I, Endrin, EPTC (Eptam), Ethylbenzene, Ethylene dibromide, Fluorene, Haloacetic acids (HAA5), Heptachlor, Heptachlor epoxide, Hexachlorobenzene (HCB), Hexachlorobutadiene, Hexachlorocyclopentadiene, Hexafluoropropylene oxide dimer acid (HFPO-DA), Isopropylbenzene, Lindane, m-Dichlorobenzene, Malathion, Methoxychlor, Metolachlor, Metribuzin, Molinate, Monobromoacetic acid, Monochloroacetic acid, Monochlorobenzene (chlorobenzene), n-Butylbenzene, n-Propylbenzene, Naphthalene, Nitrate & nitrite, Nitrite, Nonafluoro-3,6-dioxaheptanoic acid, o-Chlorotoluene, o-Dichlorobenzene, p-Chlorotoluene, p-Dichlorobenzene, p-Isopropyltoluene, Para-para DDT, Pentachlorophenol, Perfluoro(2-ethoxyethane)sulfonic acid, Perfluorobutane sulfonate (PFBS), Perfluorobutanoic acid (PFBA), Perfluorodecanoic acid (PFDA), Perfluorododecanoic acid (PFDoA), Perfluoroheptane sulfonic acid (PFHpS), Perfluoroheptanoic acid (PFHPA), Perfluorohexane sulfonate (PFHXS), Perfluorohexanoic Acid (PFHxA), Perfluorononanoic acid (PFNA), Perfluorooctane sulfonate (PFOS), Perfluorooctanoic acid (PFOA), Perfluoropentane sulfonic acid (PFPeS), Perfluoropentanoic acid (PFPeA), Perfluoroundecanoic acid (PFUnA), Phenanthrene, Picloram, Polychlorinated biphenyls (PCBs), Prometon, Propachlor, Propanoic acid, 2,2,3,3-tetrafluoro-3-(trifluorome, Pyrene, sec-Butylbenzene, Selenium, Silver, Simazine, Styrene, Terbacil, tert-Butylbenzene, Tetrachloroethylene (perchloroethylene), Thallium, Toluene, Total trihalomethanes (TTHMs), Toxaphene, trans-1,2-Dichloroethylene, Trichloroacetic acid, Trichloroethylene, Trichlorofluoromethane, Trifluralin, Vinyl chloride, Xylenes (total)

You're viewing EWG's latest annual update: The 2026 Data Set, which includes data through 2025.

Utilities test and report on varying schedules throughout the year, so EWG compiles the results into one annual update.

Find A Filter

Utility: 

Kooskooskie Cabin Owners Inc.
view utility

Carbon Filters

FILTERS 0 contaminants exceeding guidelines (+1 others)

Can reduce the levels of many common contaminants.

pros

  • Lower upfront cost
  • Reduced maintenance

cons

  • Does not remove all contaminants

Reverse Osmosis

FILTERS 1 contaminants exceeding guidelines (+3 others)

Can reduce the levels of many common contaminants.

pros

  • Most effective

cons

  • Higher upfront cost
  • Requires more maintenance
  • Wastes water

Other Considerations

Ion Exchange

Pros: Softens hard water, Reduces some contaminants

Cons: Doesn’t remove all contaminants

Whole-House Filters

Pros: Useful for reducing radiologicals and TCE

Cons: Expensive to install and maintain, Risk of bacterial contamination

Explore filter options for each contaminant. See which technologies are effective at reducing specific contaminants to help you make an informed decision on the best water treatment solution for your needs.

CONTAMINANTS ABOVE HEALTH GUIDELINES activated carbon reverse osmosis ion exchange
Radium, combined (-226 & -228)
OTHER CONTAMINANTS DETECTED activated carbon reverse osmosis ion exchange
Di(2-ethylhexyl) adipate
Fluoride
Manganese
Nitrate