Know Your Environment. Protect Your Health.

UTILITY

Hinsdale Town Water District

location

Hinsdale, New York

serves

350

source

Groundwater

data through

2025

EWG 2026 Data Set

Overview

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the New York Department of Health - Bureau of Public Water Supply Protection, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2026- March 2026), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Contaminants Detected

Nitrate

Potential Effect: cancer

This Utility: 1.97 ppm

14x

EWG's Health Guideline: 0.14 ppm

Nitrate

Nitrate, a fertilizer chemical, frequently contaminates drinking water due to agricultural and urban runoff, and discharges from municipal wastewater treatment plants and septic tanks. Excessive nitrate in water can cause oxygen deprivation in infants and increase the risk of cancer. Click here to read more about nitrate.

Nitrate was found at 14 times above EWG's Health Guideline.

EWG Health Guideline

0.14 ppm or less

This Utility

1.97 ppm

Legal Limit

10 ppm

National Average

0.814 ppm

State Average

0.555 ppm

Health Risks

The EWG health guideline of 0.14 parts per million, or ppm, for nitrate and nitrite is based on the equivalent health guideline for nitrate, as defined in a peer-reviewed scientific study by EWG. This guideline represents a one-in-one-million annual cancer risk level.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppm = parts per million

Pollution Sources

Agriculture

Runoff & Sprawl

Naturally Occurring

Filtering Options

Reverse Osmosis

Ion Exchange

Includes chemicals detected in 2023-2025 for which annual utility averages exceeded an EWG-selected health guideline established by a federal or state public health authority.

1,1,1-Trichloroethane

This Utility: 1.40 ppb

No EWG Health Guideline

1,1,1-Trichloroethane

1,1,1-Trichloroethane is a solvent and a degreasing agent used for manufacturing metal products and as ingredient in cleaners and aerosols. Exposure to 1,1,1-trichloroethane can harm the nervous system, liver and circulatory system.

How your levels compare

This Utility

1.4 ppb

Legal Limit

200 ppb

National Average

0.00114 ppb

State Average

0.00331 ppb

EWG Health Guideline

Not yet determined

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Industry

Filtering Options

Activated Carbon

Reverse Osmosis

Barium

This Utility: 265.0 ppb

EWG's Health Guideline: 700 ppb

Barium

Barium is a mineral present in rocks, soil and water. High concentrations of barium in drinking water increase the risk of cardiovascular disease and hypertension.

How your levels compare

EWG Health Guideline

700 ppb or less

This Utility

265 ppb

Legal Limit

2,000 ppb

National Average

40.9 ppb

State Average

27.3 ppb

Health Risks

The EWG Health Guideline of 700 ppb for barium was defined by EWG as benchmark that protects against harm to the kidneys and the cardiovascular system.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Reverse Osmosis

Ion Exchange

Perfluorobutane sulfonate (PFBS)

This Utility: 0.260 ppt

EWG's Health Guideline: 2,000 ppt

Perfluorobutane sulfonate (PFBS)

Perfluorobutane sulfonate (PFBS) is a member of a group of perfluorinated chemicals used in many consumer products. PFOS and other perfluorinated chemicals can cause serious health effects, including cancer, endocrine disruption, accelerated puberty, liver and immune system damage, and thyroid changes. These chemicals are persistent in the environment and they accumulate in people. Click here to read more about perfluorinated chemicals.

How your levels compare

EWG Health Guideline

2,000 ppt or less

This Utility

0.26 ppt

National Average

19.3 ppt

State Average

0.11 ppt

Health Risks

The EWG Health Guideline of 2,000 ppt for perfluorobutane sulfonate was defined by EPA’s Human Health toxicity value. This health guideline hormone disruption and harm to fetal growth and child development.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2020-2026.

ppt = parts per trillion

Pollution Sources

Industry

Runoff & Sprawl

Filtering Options

Activated Carbon

Reverse Osmosis

Includes chemicals detected in 2021-2023 for which annual utility averages were lower than an EWG-selected health guideline established by a federal or state public health authority; chemicals detected under the EPA's Unregulated Contaminant Monitoring Rule (UCMR 3) program in 2013 to 2015 (and subsequent testing when available), for which annual utility averages were lower than an EWG-selected health guideline established by a federal or state public health authority; ; chemicals detected under the EPA's Unregulated Contaminant Monitoring Rule (UCMR 5) program in 2023 to 2025 (and subsequent testing when available), for which annual utility averages exceeded a health guideline established by a federal or state public health authority.

Other Contaminants Tested

✕

Chemicals tested for but not detected:

1,1,1,2-Tetrachloroethane, 1,1,2,2-Tetrachloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethane, 1,1-Dichloroethylene, 1,1-Dichloropropene, 1,2,3-Trichlorobenzene, 1,2,3-Trichloropropane, 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene, 1,2-Dichloroethane, 1,2-Dichloropropane, 1,3,5-Trimethylbenzene, 1,3-Dichloropropane, 1,4-Dioxane, 11-chloroeicosafluoro-3-oxaundecane-1-sulfonic aci, 2,2-Dichloropropane, 2,4,5-TP (Silvex), 2,4-D, 3-Hydroxycarbofuran, 4,8-dioxa-3H-perfluorononanoic acid (ADONA), 4:2 Fluorotelomer sulfonate (4:2 FTS), 6:2 Fluorotelomer sulfonate (6:2FTS), 8:2 Fluorotelomer sulfonate (8:2FTS), 9-chlorohexadecafluoro-3-oxanone-1-sulfonic acid (, Alachlor (Lasso), Aldicarb, Aldicarb sulfone, Aldicarb sulfoxide, Aldrin, Antimony, Arsenic, Atrazine, Benzene, Benzo[a]pyrene, Beryllium, Bromobenzene, Bromochloromethane, Bromomethane, Butachlor, Butanoic acid, 2,2,3,3,4,4-hexafluoro-4-(trifluoro, Cadmium, Carbaryl, Carbofuran, Carbon tetrachloride, Chlordane, Chloroethane, Chloroform, Chloromethane, cis-1,2-Dichloroethylene, cis-1,3-Dichloropropene, Cyanide, Dalapon, Di(2-ethylhexyl) adipate, Di(2-ethylhexyl) phthalate, Dibromomethane, Dicamba, Dichloroacetic acid, Dichlorodifluoromethane, Dichloromethane (methylene chloride), Dieldrin, Dinoseb, Endrin, Ethylbenzene, Ethylene dibromide, Fluoride, Heptachlor, Heptachlor epoxide, Hexachlorobenzene (HCB), Hexachlorobutadiene, Hexachlorocyclopentadiene, Hexafluoropropylene oxide dimer acid (HFPO-DA), Isopropylbenzene, Lindane, m-Dichlorobenzene, Mercury (inorganic), Methomyl, Methoxychlor, Metolachlor, Metribuzin, Monobromoacetic acid, Monochloroacetic acid, Monochlorobenzene (chlorobenzene), MTBE, n-Butylbenzene, N-ethyl perfluorooctane sulfonamido acetic acid (N, N-methyl perfluorooctanesulfonamidoacetic acid, n-Propylbenzene, Nonafluoro-3,6-dioxaheptanoic acid, o-Chlorotoluene, o-Dichlorobenzene, Oxamyl (Vydate), p-Chlorotoluene, p-Dichlorobenzene, p-Isopropyltoluene, Pentachlorophenol, Perfluoro(2-ethoxyethane)sulfonic acid, Perfluorobutanoic acid (PFBA), Perfluorodecanoic acid (PFDA), Perfluorododecanoic acid (PFDoA), Perfluoroheptane sulfonic acid (PFHpS), Perfluoroheptanoic acid (PFHPA), Perfluorohexane sulfonate (PFHXS), Perfluorohexanoic Acid (PFHxA), Perfluorononanoic acid (PFNA), Perfluorooctane sulfonate (PFOS), Perfluorooctanoic acid (PFOA), Perfluoropentane sulfonic acid (PFPeS), Perfluoropentanoic acid (PFPeA), Perfluorotetradecanoic acid (PFTA), Perfluorotridecanoic acid (PFTrDA), Perfluoroundecanoic acid (PFUnA), Picloram, Polychlorinated biphenyls (PCBs), Propachlor, Propanoic acid, 2,2,3,3-tetrafluoro-3-(trifluorome, Radium, combined (-226 & -228), sec-Butylbenzene, Selenium, Simazine, Styrene, tert-Butylbenzene, Tetrachloroethylene (perchloroethylene), Thallium, Toluene, Toxaphene, trans-1,2-Dichloroethylene, trans-1,3-Dichloropropene, Trichloroacetic acid, Trichloroethylene, Trichlorofluoromethane, Vinyl chloride, Xylenes (total)

You're viewing EWG's latest annual update: The 2026 Data Set, which includes data through 2025.

Utilities test and report on varying schedules throughout the year, so EWG compiles the results into one annual update.

Find A Filter

Utility: 

Hinsdale Town Water District
view utility

Carbon Filters

FILTERS 0 contaminants exceeding guidelines (+2 others)

Can reduce the levels of many common contaminants.

pros

  • Lower upfront cost
  • Reduced maintenance

cons

  • Does not remove all contaminants

Reverse Osmosis

FILTERS 1 contaminants exceeding guidelines (+3 others)

Can reduce the levels of many common contaminants.

pros

  • Most effective

cons

  • Higher upfront cost
  • Requires more maintenance
  • Wastes water

Other Considerations

Ion Exchange

Pros: Softens hard water, Reduces some contaminants

Cons: Doesn’t remove all contaminants

Whole-House Filters

Pros: Useful for reducing radiologicals and TCE

Cons: Expensive to install and maintain, Risk of bacterial contamination

Explore filter options for each contaminant. See which technologies are effective at reducing specific contaminants to help you make an informed decision on the best water treatment solution for your needs.

CONTAMINANTS ABOVE HEALTH GUIDELINES activated carbon reverse osmosis ion exchange
Nitrate
OTHER CONTAMINANTS DETECTED activated carbon reverse osmosis ion exchange
1,1,1-Trichloroethane
Barium
Perfluorobutane sulfonate (PFBS)