Know Your Environment. Protect Your Health.

UTILITY

Dogwood Place Subdivision

location

Candler County, Georgia

serves

32

source

Groundwater

data through

2025

EWG 2026 Data Set

Overview

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Georgia Department of Natural Resources, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2026- March 2026), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Contaminants Detected

There were no chemicals detected above health guidelines for this water system.

 

Chloroform

This Utility: 0.700 ppb

EWG's Health Guideline: 0.4 ppb

Chloroform

Chloroform, one of the total trihalomethanes (TTHMs), is formed when chlorine or other disinfectants are used to treat drinking water. Chloroform and other disinfection byproducts increase the risk of cancer and may cause problems during pregnancy.

How your levels compare

EWG Health Guideline

0.4 ppb or less

This Utility

0.7 ppb

National Average

16.2 ppb

State Average

25 ppb

Health Risks

The EWG Health Guideline of 0.4 ppb for chloroform was based on the California Office of Environmental Health Hazard Assessment's public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer and harm to fetal growth and development.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

Fluoride

This Utility: 0.257 ppm

No EWG Health Guideline

Fluoride

Fluoride occurs naturally in surface and groundwater and is also added to drinking water by many water systems to prevent cavities and support oral health in people.

In 2015, the Department of Health and Human Services updated its recommendation of an optimal level of 0.7 parts per million, or ppm, added to drinking water based on the health benefits of tooth decay prevention. Studies have shown that fluoride added to community water systems at this level reduces dental cavities, especially in children.

And studies have conclusively shown that fluoride in toothpaste and mouthwash can also provide these benefits.

How your levels compare

This Utility

0.257 ppm

Legal Limit

4 ppm

National Average

0.485 ppm

State Average

0.603 ppm

EWG Health Guideline

Not yet determined

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppm = parts per million

Pollution Sources

Industry

Treatment Byproducts

Naturally Occurring

Filtering Options

Reverse Osmosis

Manganese

This Utility: 25.6 ppb

EWG's Health Guideline: 100 ppb

Manganese

Manganese is a naturally occurring element that is common in food and drinking water. Excessive manganese exposures may impair children's attention, memory and intellectual capacity. Click here to read more about manganese.

How your levels compare

EWG Health Guideline

100 ppb or less

This Utility

25.6 ppb

National Average

8.37 ppb

State Average

5.9 ppb

Health Risks

The EWG Health Guideline of 100 ppb for manganese was defined by the state of Minnesota as a health risk limit, the concentration of a contaminant that can be consumed with little or no risk to health. This health guideline protects against harm to the brain and nervous system.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2018-2025.

ppb = parts per billion

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Ion Exchange

Methyl ethyl ketone

This Utility: 180.0 ppb

No EWG Health Guideline

Methyl ethyl ketone

Methyl ethyl ketone is a volatile solvent used in paints, adhesives, and other industrial and consumer goods.

How your levels compare

This Utility

180 ppb

National Average

0.0617 ppb

State Average

21.1 ppb

EWG Health Guideline

Not yet determined

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Industry

Runoff & Sprawl

Filtering Options

Activated Carbon

Reverse Osmosis

Toluene

This Utility: 0.374 ppb

EWG's Health Guideline: 150 ppb

Toluene

Toluene is a volatile solvent that harms the nervous and immune systems, damages the liver and may increase the risk of miscarriage and birth defects.

How your levels compare

EWG Health Guideline

150 ppb or less

This Utility

0.374 ppb

Legal Limit

1,000 ppb

National Average

0.00631 ppb

State Average

0.00251 ppb

Health Risks

The EWG Health Guideline of 150 ppb for toluene was defined by the California Office of Environmental Health Hazard Assessment as a public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against harm to internal organs.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Industry

Filtering Options

Activated Carbon

Reverse Osmosis

Includes chemicals detected in 2021-2023 for which annual utility averages were lower than an EWG-selected health guideline established by a federal or state public health authority; chemicals detected under the EPA's Unregulated Contaminant Monitoring Rule (UCMR 4) program in 2017 to 2020 (and subsequent testing when available), for which annual utility averages exceeded a health guideline established by a federal or state public health authority.

Other Contaminants Tested

✕

Chemicals tested for but not detected:

1,1,1,2-Tetrachloroethane, 1,1,1-Trichloroethane, 1,1,2,2-Tetrachloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethane, 1,1-Dichloroethylene, 1,1-Dichloropropene, 1,2,3-Trichlorobenzene, 1,2,3-Trichloropropane, 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene, 1,2-Dibromo-3-chloropropane (DBCP), 1,2-Dichloroethane, 1,2-Dichloropropane, 1,3,5-Trimethylbenzene, 1,3-Dichloropropane, 2,2-Dichloropropane, 2,4,5-TP (Silvex), 2,4-D, Alachlor (Lasso), Aldicarb, Aldicarb sulfone, Aldicarb sulfoxide, Aluminum, Antimony, Arsenic, Atrazine, Barium, Benzene, Benzo[a]pyrene, Beryllium, Bromobenzene, Bromochloromethane, Bromodichloromethane, Bromoform, Bromomethane, Cadmium, Carbofuran, Carbon tetrachloride, Chlordane, Chloroethane, Chloromethane, Chromium (total), cis-1,2-Dichloroethylene, cis-1,3-Dichloropropene, Dalapon, Di(2-ethylhexyl) adipate, Di(2-ethylhexyl) phthalate, Dibromoacetic acid, Dibromochloromethane, Dibromomethane, Dicamba, Dichloroacetic acid, Dichlorodifluoromethane, Dichloromethane (methylene chloride), Dinoseb, Diquat, Endothall, Endrin, Ethylbenzene, Ethylene dibromide, Glyphosate, Haloacetic acids (HAA5), Heptachlor, Heptachlor epoxide, Hexachlorobenzene (HCB), Hexachlorobutadiene, Hexachlorocyclopentadiene, Isopropylbenzene, Lindane, m-Dichlorobenzene, Mercury (inorganic), Methomyl, Methoxychlor, Monobromoacetic acid, Monochloroacetic acid, Monochlorobenzene (chlorobenzene), MTBE, n-Butylbenzene, n-Propylbenzene, Naphthalene, Nitrate & nitrite, o-Chlorotoluene, o-Dichlorobenzene, Oxamyl (Vydate), p-Chlorotoluene, p-Dichlorobenzene, p-Isopropyltoluene, Pentachlorophenol, Picloram, Polychlorinated biphenyls (PCBs), Radium, combined (-226 & -228), sec-Butylbenzene, Selenium, Simazine, Styrene, tert-Butylbenzene, Tetrachloroethylene (perchloroethylene), Thallium, Total trihalomethanes (TTHMs), Toxaphene, trans-1,2-Dichloroethylene, trans-1,3-Dichloropropene, Trichloroacetic acid, Trichloroethylene, Trichlorofluoromethane, Vinyl chloride, Xylenes (total)

You're viewing EWG's latest annual update: The 2026 Data Set, which includes data through 2025.

Utilities test and report on varying schedules throughout the year, so EWG compiles the results into one annual update.

Find A Filter

Utility: 

Dogwood Place Subdivision
view utility

Carbon Filters

FILTERS 0 contaminants exceeding guidelines (+3 others)

Can reduce the levels of many common contaminants.

pros

  • Lower upfront cost
  • Reduced maintenance

cons

  • Does not remove all contaminants

Reverse Osmosis

FILTERS 0 contaminants exceeding guidelines (+4 others)

Can reduce the levels of many common contaminants.

pros

  • Most effective

cons

  • Higher upfront cost
  • Requires more maintenance
  • Wastes water

Other Considerations

Ion Exchange

Pros: Softens hard water, Reduces some contaminants

Cons: Doesn’t remove all contaminants

Whole-House Filters

Pros: Useful for reducing radiologicals and TCE

Cons: Expensive to install and maintain, Risk of bacterial contamination

Explore filter options for each contaminant. See which technologies are effective at reducing specific contaminants to help you make an informed decision on the best water treatment solution for your needs.

OTHER CONTAMINANTS DETECTED activated carbon reverse osmosis ion exchange
Chloroform
Fluoride
Manganese
Methyl ethyl ketone
Toluene