Know Your Environment. Protect Your Health.

UTILITY

Amberwood Subdivision

location

Statesboro, Georgia

serves

434

source

Groundwater

data through

2025

EWG 2026 Data Set

Overview

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Georgia Department of Natural Resources, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2026- March 2026), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Contaminants Detected

Antimony

Potential Effect: harm to the stomach and intestines

This Utility: 3.70 ppb

3.7x

EWG's Health Guideline: 1 ppb

Antimony

Antimony is a naturally occurring metal that enters tap water from plumbing fittings and also from industrial uses, such as production of metal alloys, batteries and plastics. Antimony causes organ damage and shortens lifespans in studies of laboratory animals.

Antimony was found at 3.7 times above EWG's Health Guideline.

EWG Health Guideline

1 ppb or less

This Utility

3.7 ppb

Legal Limit

6 ppb

National Average

0.0134 ppb

State Average

0.00517 ppb

Health Risks

The EWG Health Guideline of 1 ppb for antimony was defined by the California Office of Environmental Health Hazard Assessment as a public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against change to the stomach and intestines.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Industry

Runoff & Sprawl

Naturally Occurring

Filtering Options

Reverse Osmosis

Dibromochloromethane

Potential Effect: cancer

This Utility: 0.300 ppb

3x

EWG's Health Guideline: 0.1 ppb

Dibromochloromethane

Dibromochloromethane, one of the total trihalomethanes (TTHMs), is formed when chlorine or other disinfectants are used to treat drinking water. Dibromochloromethane and other disinfection byproducts increase the risk of cancer and may cause problems during pregnancy. Click here to read more about disinfection byproducts.

Dibromochloromethane was found at 3 times above EWG's Health Guideline.

EWG Health Guideline

0.1 ppb or less

This Utility

0.3 ppb

National Average

3.6 ppb

State Average

1.77 ppb

Health Risks

The EWG Health Guideline of 0.1 ppb for dibromochloromethane was based on the California Office of Environmental Health Hazard Assessment's public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer and harm to fetal growth and development.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Treatment Byproducts

Filtering Options

Activated Carbon

Reverse Osmosis

Includes chemicals detected in 2023-2025 for which annual utility averages exceeded an EWG-selected health guideline established by a federal or state public health authority.

Fluoride

This Utility: 0.280 ppm

No EWG Health Guideline

Fluoride

Fluoride occurs naturally in surface and groundwater and is also added to drinking water by many water systems to prevent cavities and support oral health in people.

In 2015, the Department of Health and Human Services updated its recommendation of an optimal level of 0.7 parts per million, or ppm, added to drinking water based on the health benefits of tooth decay prevention. Studies have shown that fluoride added to community water systems at this level reduces dental cavities, especially in children.

And studies have conclusively shown that fluoride in toothpaste and mouthwash can also provide these benefits.

How your levels compare

This Utility

0.28 ppm

Legal Limit

4 ppm

National Average

0.485 ppm

State Average

0.603 ppm

EWG Health Guideline

Not yet determined

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppm = parts per million

Pollution Sources

Industry

Treatment Byproducts

Naturally Occurring

Filtering Options

Reverse Osmosis

Includes chemicals detected in 2021-2023 for which annual utility averages were lower than an EWG-selected health guideline established by a federal or state public health authority.

Other Contaminants Tested

✕

Chemicals tested for but not detected:

1,1,1,2-Tetrachloroethane, 1,1,1-Trichloroethane, 1,1,2,2-Tetrachloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethane, 1,1-Dichloroethylene, 1,1-Dichloropropene, 1,2,3-Trichlorobenzene, 1,2,3-Trichloropropane, 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene, 1,2-Dibromo-3-chloropropane (DBCP), 1,2-Dichloroethane, 1,2-Dichloropropane, 1,3,5-Trimethylbenzene, 1,3-Dichloropropane, 2,2-Dichloropropane, Aluminum, Arsenic, Barium, Benzene, Beryllium, Bromobenzene, Bromochloromethane, Bromodichloromethane, Bromoform, Bromomethane, Cadmium, Carbon tetrachloride, Chloroethane, Chloroform, Chloromethane, Chromium (total), cis-1,2-Dichloroethylene, cis-1,3-Dichloropropene, Dibromoacetic acid, Dibromomethane, Dichloroacetic acid, Dichlorodifluoromethane, Dichloromethane (methylene chloride), Ethylbenzene, Ethylene dibromide, Haloacetic acids (HAA5), Hexachlorobutadiene, Isopropylbenzene, m-Dichlorobenzene, Manganese, Mercury (inorganic), Monobromoacetic acid, Monochloroacetic acid, Monochlorobenzene (chlorobenzene), MTBE, n-Butylbenzene, n-Propylbenzene, Naphthalene, Nitrate & nitrite, o-Chlorotoluene, o-Dichlorobenzene, p-Chlorotoluene, p-Dichlorobenzene, p-Isopropyltoluene, Radium, combined (-226 & -228), sec-Butylbenzene, Selenium, Styrene, tert-Butylbenzene, Tetrachloroethylene (perchloroethylene), Thallium, Toluene, Total trihalomethanes (TTHMs), trans-1,2-Dichloroethylene, trans-1,3-Dichloropropene, Trichloroacetic acid, Trichloroethylene, Trichlorofluoromethane, Vinyl chloride, Xylenes (total)

You're viewing EWG's latest annual update: The 2026 Data Set, which includes data through 2025.

Utilities test and report on varying schedules throughout the year, so EWG compiles the results into one annual update.

Find A Filter

Utility: 

Amberwood Subdivision
view utility

Carbon Filters

FILTERS 1 contaminants exceeding guidelines (+0 others)

Can reduce the levels of many common contaminants.

pros

  • Lower upfront cost
  • Reduced maintenance

cons

  • Does not remove all contaminants

Reverse Osmosis

FILTERS 2 contaminants exceeding guidelines (+1 others)

Can reduce the levels of many common contaminants.

pros

  • Most effective

cons

  • Higher upfront cost
  • Requires more maintenance
  • Wastes water

Other Considerations

Ion Exchange

Pros: Softens hard water, Reduces some contaminants

Cons: Doesn’t remove all contaminants

Whole-House Filters

Pros: Useful for reducing radiologicals and TCE

Cons: Expensive to install and maintain, Risk of bacterial contamination

Explore filter options for each contaminant. See which technologies are effective at reducing specific contaminants to help you make an informed decision on the best water treatment solution for your needs.

CONTAMINANTS ABOVE HEALTH GUIDELINES activated carbon reverse osmosis ion exchange
Antimony
Dibromochloromethane
OTHER CONTAMINANTS DETECTED activated carbon reverse osmosis ion exchange
Fluoride