Know Your Environment. Protect Your Health.

UTILITY

Village Apartments

location

Tulare County, California

serves

33

source

Groundwater

data through

2025

EWG 2026 Data Set

Overview

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the California State Water Resources Control Board, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2026- March 2026), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Contaminants Detected

There were no chemicals detected above health guidelines for this water system.

 

Fluoride

This Utility: 0.300 ppm

No EWG Health Guideline

Fluoride

Fluoride occurs naturally in surface and groundwater and is also added to drinking water by many water systems to prevent cavities and support oral health in people.

In 2015, the Department of Health and Human Services updated its recommendation of an optimal level of 0.7 parts per million, or ppm, added to drinking water based on the health benefits of tooth decay prevention. Studies have shown that fluoride added to community water systems at this level reduces dental cavities, especially in children.

And studies have conclusively shown that fluoride in toothpaste and mouthwash can also provide these benefits.

How your levels compare

This Utility

0.3 ppm

Legal Limit

4 ppm

National Average

0.485 ppm

State Average

0.477 ppm

EWG Health Guideline

Not yet determined

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppm = parts per million

Pollution Sources

Industry

Treatment Byproducts

Naturally Occurring

Filtering Options

Reverse Osmosis

Germanium

This Utility: 9.25 ppb

No EWG Health Guideline

Germanium

Germanium is a naturally occuring element used as a component in semiconductors and fiber optics. Excessive exposures to germanium may harm the kidneys.

How your levels compare

This Utility

9.25 ppb

National Average

0.0295 ppb

State Average

0.0591 ppb

EWG Health Guideline

Not yet determined

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2018-2021.

ppb = parts per billion

Pollution Sources

Naturally Occurring

Filtering Options

Reverse Osmosis

Manganese

This Utility: 13.0 ppb

EWG's Health Guideline: 100 ppb

Manganese

Manganese is a naturally occurring element that is common in food and drinking water. Excessive manganese exposures may impair children's attention, memory and intellectual capacity. Click here to read more about manganese.

How your levels compare

EWG Health Guideline

100 ppb or less

This Utility

13 ppb

National Average

8.37 ppb

State Average

3.92 ppb

Health Risks

The EWG Health Guideline of 100 ppb for manganese was defined by the state of Minnesota as a health risk limit, the concentration of a contaminant that can be consumed with little or no risk to health. This health guideline protects against harm to the brain and nervous system.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2018-2025.

ppb = parts per billion

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Ion Exchange

Selenium

This Utility: 7.00 ppb

EWG's Health Guideline: 30 ppb

Selenium

Selenium is an essential element in diets. But too much selenium can decrease thyroid hormone production and cause hair loss, skin lesions and brittle fingernails.

How your levels compare

EWG Health Guideline

30 ppb or less

This Utility

7 ppb

Legal Limit

50 ppb

National Average

0.3 ppb

State Average

0.289 ppb

Health Risks

The EWG Health Guideline of 30 ppb for selenium was defined by the California Office of Environmental Health Hazard Assessment as a public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against hair loss and nail damage.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Reverse Osmosis

Includes chemicals detected in 2021-2023 for which annual utility averages were lower than an EWG-selected health guideline established by a federal or state public health authority; chemicals detected under the EPA's Unregulated Contaminant Monitoring Rule (UCMR 4) program in 2017 to 2020 (and subsequent testing when available), for which annual utility averages exceeded a health guideline established by a federal or state public health authority.

Other Contaminants Tested

✕

Chemicals tested for but not detected:

1,1,1,2-Tetrachloroethane, 1,1,1-Trichloroethane, 1,1,2,2-Tetrachloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethane, 1,1-Dichloroethylene, 1,1-Dichloropropene, 1,2,3-Trichlorobenzene, 1,2,3-Trichloropropane, 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene, 1,2-Dibromo-3-chloropropane (DBCP), 1,2-Dichloroethane, 1,2-Dichloropropane, 1,3,5-Trimethylbenzene, 1,3-Dichloropropane, 1,3-Dichloropropene, 1-butanol, 11-chloroeicosafluoro-3-oxaundecane-1-sulfonic aci, 2,2-Dichloropropane, 2-methoxyethanol, 2-propen-1-ol, 4,8-dioxa-3H-perfluorononanoic acid (ADONA), 4:2 Fluorotelomer Sulfonic Acid (4:2 FTSA), 6:2 Fluorotelomer Sulfonic Acid (6:2 FTSA), 8:2 Fluorotelomer Sulfonic Acid (8:2 FTSA), 9-chlorohexadecafluoro-3-oxanone-1-sulfonic acid (, Alachlor (Lasso), Alpha-hexachlorocyclohexane, Aluminum, Antimony, Arsenic, Atrazine, Barium, Benzene, Beryllium, Bromacil, Bromobenzene, Bromochloromethane, Bromomethane, Butanoic acid, 2,2,3,3,4,4-hexafluoro-4-(trifluoro, Butylated hydroxyanisole, Cadmium, Carbon tetrachloride, Chloroethane, Chloromethane, Chlorpyriphos, Chromium (hexavalent), Chromium (total), cis-1,2-Dichloroethylene, cis-1,3-Dichloropropene, Diazinon (Spectracide), Dibromomethane, Dichlorodifluoromethane, Dichloromethane (methylene chloride), Dimethipin, Dimethoate, Ethoprop, Ethyl tert-butyl ether, Ethylbenzene, Ethylene dibromide, Hexachlorobutadiene, Hexafluoropropylene oxide dimer acid (HFPO-DA), Isopropyl ether, Isopropylbenzene, m-Dichlorobenzene, Mercury (inorganic), Metolachlor, Metribuzin, Molinate, Monochlorobenzene (chlorobenzene), MTBE, n-Butylbenzene, n-Propylbenzene, Naphthalene, Nitrate, Nitrate & nitrite, Nitrite, Nonafluoro-3,6-dioxaheptanoic acid, o-Chlorotoluene, o-Dichlorobenzene, o-toluidine, Oxyflurofen, p-Chlorotoluene, p-Dichlorobenzene, p-Isopropyltoluene, Perchlorate, Perfluoro(2-ethoxyethane)sulfonic acid, Perfluorobutane sulfonate (PFBS), Perfluorobutanoic acid (PFBA), Perfluorodecanoic acid (PFDA), Perfluorododecanoic acid (PFDoA), Perfluoroheptane sulfonic acid (PFHpS), Perfluoroheptanoic acid (PFHPA), Perfluorohexane sulfonate (PFHXS), Perfluorohexanoic Acid (PFHxA), Perfluorononanoic acid (PFNA), Perfluorooctane sulfonate (PFOS), Perfluorooctanoic acid (PFOA), Perfluoropentane sulfonic acid (PFPeS), Perfluoropentanoic acid (PFPeA), Perfluoroundecanoic acid (PFUnA), Permethrin, Profenofos, Prometryn, Propanoic acid, 2,2,3,3-tetrafluoro-3-(trifluorome, Quinoline, sec-Butylbenzene, Silver, Simazine, Styrene, Tebuconazole, tert-Amyl methyl ether, tert-Butylbenzene, Tetrachloroethylene (perchloroethylene), Thallium, Thiobencarb, Toluene, trans-1,2-Dichloroethylene, trans-1,3-Dichloropropene, Tribufos, Trichloroethylene, Trichlorofluoromethane, Trichlorotrifluoroethane, Vanadium, Vinyl chloride, Xylenes (total)

You're viewing EWG's latest annual update: The 2026 Data Set, which includes data through 2025.

Utilities test and report on varying schedules throughout the year, so EWG compiles the results into one annual update.

Find A Filter

Utility: 

Village Apartments
view utility

Carbon Filters

FILTERS 0 contaminants exceeding guidelines (+0 others)

Can reduce the levels of many common contaminants.

pros

  • Lower upfront cost
  • Reduced maintenance

cons

  • Does not remove all contaminants

Reverse Osmosis

FILTERS 0 contaminants exceeding guidelines (+3 others)

Can reduce the levels of many common contaminants.

pros

  • Most effective

cons

  • Higher upfront cost
  • Requires more maintenance
  • Wastes water

Other Considerations

Ion Exchange

Pros: Softens hard water, Reduces some contaminants

Cons: Doesn’t remove all contaminants

Whole-House Filters

Pros: Useful for reducing radiologicals and TCE

Cons: Expensive to install and maintain, Risk of bacterial contamination

Explore filter options for each contaminant. See which technologies are effective at reducing specific contaminants to help you make an informed decision on the best water treatment solution for your needs.

OTHER CONTAMINANTS DETECTED activated carbon reverse osmosis ion exchange
Fluoride
Germanium
Manganese
Selenium