Know Your Environment. Protect Your Health.

UTILITY

Blalock Orchard District 10

location

Walla Walla County, Washington

serves

250

source

Groundwater

data through

2025

EWG 2026 Data Set

Overview

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Washington State Department of Health, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2026- March 2026), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Contaminants Detected

There were no chemicals detected above health guidelines for this water system.

 

DCPA di-acid degradate

This Utility: 0.184 ppb

No EWG Health Guideline

DCPA di-acid degradate

DCPA di-acid degradate is a residue of the herbicide dacthal, or DCPA, which is used for urban, household and agricultural applications. Dacthal is a possible human carcinogen whose use was limited by the EPA in 2005 due to concerns about water contamination.

How your levels compare

This Utility

0.184 ppb

National Average

0.0372 ppb

State Average

0.0415 ppb

EWG Health Guideline

Not yet determined

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2023-2025.

ppb = parts per billion

Pollution Sources

Agriculture

Runoff & Sprawl

Filtering Options

Activated Carbon

Reverse Osmosis

Manganese

This Utility: 69.1 ppb

EWG's Health Guideline: 100 ppb

Manganese

Manganese is a naturally occurring element that is common in food and drinking water. Excessive manganese exposures may impair children's attention, memory and intellectual capacity. Click here to read more about manganese.

How your levels compare

EWG Health Guideline

100 ppb or less

This Utility

69.1 ppb

National Average

8.37 ppb

State Average

11.1 ppb

Health Risks

The EWG Health Guideline of 100 ppb for manganese was defined by the state of Minnesota as a health risk limit, the concentration of a contaminant that can be consumed with little or no risk to health. This health guideline protects against harm to the brain and nervous system.

Legal Limit

None

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2018-2025.

ppb = parts per billion

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Ion Exchange

Radium, combined (-226 and -228)

This Utility: 0.02 pCi/L

EWG's Health Guideline: 0.05 pCi/L

Radium, combined (-226 and -228)

Radium is a radioactive element that causes bone cancer and other cancers. It can occur naturally in groundwater, and oil and gas extraction activities such as hydraulic fracturing can elevate concentrations.

How your levels compare

EWG Health Guideline

0.05 pCi/L or less

This Utility

0.02 pCi/L

Legal Limit

5 pCi/L

National Average

0.33 pCi/L

State Average

0.27 pCi/L

Health Risks

EWG applied the health guideline of 0.05 pCi/L, defined by the California Office of Environmental Health Hazard Assessment as a public health goal for radium-226, to radium-226 and radium-228 combined. This health guideline protects against cancer.

Understanding the Data

The state and national averages were calculated using the averages of the contaminant measurements for each utility in 2020-2025.

pCi/L = picocuries per liter

Pollution Sources

Industry

Naturally Occurring

Filtering Options

Reverse Osmosis

Ion Exchange

Includes chemicals detected in 2021-2023 for which annual utility averages were lower than an EWG-selected health guideline established by a federal or state public health authority; chemicals detected under the EPA's Unregulated Contaminant Monitoring Rule (UCMR 4) program in 2017 to 2020 (and subsequent testing when available), for which annual utility averages exceeded a health guideline established by a federal or state public health authority.

Other Contaminants Tested

✕

Chemicals tested for but not detected:

1,1,1,2-Tetrachloroethane, 1,1,1-Trichloroethane, 1,1,2,2-Tetrachloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethane, 1,1-Dichloroethylene, 1,1-Dichloropropene, 1,2,3-Trichlorobenzene, 1,2,3-Trichloropropane, 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene, 1,2-Dibromo-3-chloropropane (DBCP), 1,2-Dichloroethane, 1,2-Dichloropropane, 1,3,5-Trimethylbenzene, 1,3-Dichloropropane, 11-chloroeicosafluoro-3-oxaundecane-1-sulfonic aci, 2,4,5-T, 2,4,5-TP (Silvex), 2,4-D, 2,4-DB, 4,4'-dde, 4,8-dioxa-3H-perfluorononanoic acid (ADONA), 4:2 Fluorotelomer sulfonate (4:2 FTS), 6:2 Fluorotelomer sulfonate (6:2FTS), 8:2 Fluorotelomer sulfonate (8:2FTS), 9-chlorohexadecafluoro-3-oxanone-1-sulfonic acid (, Acenaphthene, Acenaphthylene, Acifluorfen (Blazer), Alachlor (Lasso), Aldrin, Anthracene, Atrazine, Bentazon (Basagran), Benzene, Benzoic acid, Benzo[a]anthracene, Benzo[a]pyrene, Benzo[b]fluoranthene, Benzo[g,h,i]perylene, Benzo[k]fluoranthene, Bromacil, Bromobenzene, Bromochloromethane, Bromodichloromethane, Bromoform, Bromomethane, Butachlor, Butanoic acid, 2,2,3,3,4,4-hexafluoro-4-(trifluoro, Butyl benzyl phthalate, Carbon tetrachloride, Chloramben, Chlordane, Chloroform, Chloromethane, Chrysene, cis-1,2-Dichloroethylene, Cyanazine (Bladex), Dalapon, Di(2-ethylhexyl) adipate, Di(2-ethylhexyl) phthalate, Di-n-butyl phthalate, Diazinon (Spectracide), Dibenz[a,h]anthracene, Dibromochloromethane, Dibromomethane, Dicamba, Dichlorodifluoromethane, Dichloromethane (methylene chloride), Dichlorprop, Dicofal, Dieldrin, Diethyl phthalate, Dimethyl phthalate, Dinoseb, Endosulfan I, Endrin, EPTC (Eptam), Ethylbenzene, Ethylene dibromide, Fluorene, Heptachlor, Heptachlor epoxide, Hexachlorobenzene (HCB), Hexachlorobutadiene, Hexachlorocyclopentadiene, Hexafluoropropylene oxide dimer acid (HFPO-DA), Isopropylbenzene, Lindane, m-Dichlorobenzene, Malathion, Methoxychlor, Metolachlor, Metribuzin, Molinate, Monochlorobenzene (chlorobenzene), n-Butylbenzene, n-Propylbenzene, Naphthalene, Nitrate, Nonafluoro-3,6-dioxaheptanoic acid, o-Chlorotoluene, o-Dichlorobenzene, p-Chlorotoluene, p-Dichlorobenzene, p-Isopropyltoluene, Para-para DDT, Pentachlorophenol, Perfluoro(2-ethoxyethane)sulfonic acid, Perfluorobutane sulfonate (PFBS), Perfluorobutanoic acid (PFBA), Perfluorodecanoic acid (PFDA), Perfluorododecanoic acid (PFDoA), Perfluoroheptane sulfonic acid (PFHpS), Perfluoroheptanoic acid (PFHPA), Perfluorohexane sulfonate (PFHXS), Perfluorohexanoic Acid (PFHxA), Perfluorononanoic acid (PFNA), Perfluorooctane sulfonate (PFOS), Perfluorooctanoic acid (PFOA), Perfluoropentane sulfonic acid (PFPeS), Perfluoropentanoic acid (PFPeA), Perfluoroundecanoic acid (PFUnA), Phenanthrene, Picloram, Polychlorinated biphenyls (PCBs), Prometon, Propachlor, Propanoic acid, 2,2,3,3-tetrafluoro-3-(trifluorome, Pyrene, sec-Butylbenzene, Simazine, Styrene, Terbacil, tert-Butylbenzene, Tetrachloroethylene (perchloroethylene), Toluene, Total trihalomethanes (TTHMs), Toxaphene, trans-1,2-Dichloroethylene, Trichloroethylene, Trichlorofluoromethane, Trifluralin, Vinyl chloride, Xylenes (total)

You're viewing EWG's latest annual update: The 2026 Data Set, which includes data through 2025.

Utilities test and report on varying schedules throughout the year, so EWG compiles the results into one annual update.

Find A Filter

Utility: 

Blalock Orchard District 10
view utility

Carbon Filters

FILTERS 0 contaminants exceeding guidelines (+1 others)

Can reduce the levels of many common contaminants.

pros

  • Lower upfront cost
  • Reduced maintenance

cons

  • Does not remove all contaminants

Reverse Osmosis

FILTERS 0 contaminants exceeding guidelines (+2 others)

Can reduce the levels of many common contaminants.

pros

  • Most effective

cons

  • Higher upfront cost
  • Requires more maintenance
  • Wastes water

Other Considerations

Ion Exchange

Pros: Softens hard water, Reduces some contaminants

Cons: Doesn’t remove all contaminants

Whole-House Filters

Pros: Useful for reducing radiologicals and TCE

Cons: Expensive to install and maintain, Risk of bacterial contamination

Explore filter options for each contaminant. See which technologies are effective at reducing specific contaminants to help you make an informed decision on the best water treatment solution for your needs.

OTHER CONTAMINANTS DETECTED activated carbon reverse osmosis ion exchange
DCPA di-acid degradate
Manganese
Radium, combined (-226 & -228)