Di(2-ethylhexyl) adipate
Broadhurst/turner Downs S/d
Di(2-ethylhexyl) adipate is used in PVC plastic, plastic wrap and other consumer products. It is released as a pollutant from industrial sources and sewage treatment plants. In studies of laboratory animals, di(2-ethylhexyl) adipate can harm fetal development.
Samples
Samples exceeding legal limit (MCL)
Samples exceeding
health guidelines
Testing results - average by year
Year | Average result | Samples taken | Detections | Range of results |
---|---|---|---|---|
2014 | ND | 2 | 0 | ND |
2015 | ND | 1 | 0 | ND |
2016 | N/A | 0 | 0 | N/A |
2017 | ND | 2 | 0 | ND |
2018 | ND | 1 | 0 | ND |
2019 | N/A | 0 | 0 | N/A |
ppb = parts per billion
State and national drinking water standards and health guidelines
EWG Health Guideline 200 ppb
The EWG Health Guideline of 200 ppb for di(2-ethylhexyl) adipate was defined by the California Office of Environmental Health Hazard Assessment as a public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against harm to internal organs.
EPA Maximum Contaminant
Level (MCL) 400 ppb
The legal limit for di(2-ethylhexyl) adipate, established in 1992, was based on a toxicity study in laboratory animals conducted in the 1980s.
ppb = parts per billion
All test results
Date | Lab ID | Result |
---|---|---|
2014-04-15 | C403034-01RE2 | ND |
2014-04-23 | C404961-01 | ND |
2015-04-15 | ND | |
2017-04-18 | CA02882-01 | ND |
2017-04-24 | CA02880-01 | ND |
2018-04-10 | CB03281-01 | ND |