Menu

EWG's Tap Water Database — 2021 UPDATE

Donate

Styrene

Washington County Rural Water District 1

Styrene is a volatile cancer-causing chemical used for manufacturing Styrofoam (polystyrene) and other plastics. Releases from industrial production sites and hazardous waste landfills cause styrene contamination in drinking water. Read More.

In addition to increasing the risk of cancer, styrene can also damage the liver and the nervous system. California set a public health goal for styrene in drinking water at 0.5 parts per billion. The federal Maximum Contaminant Level (MCL) allows up to 100 parts per billion of styrene in water, which is 200 times more than the California recommended level.

Click here to read more about carcinogenic VOCs.

 

15

Samples

0

Samples exceeding legal limit (MCL)

0

Samples exceeding
health guidelines

Testing results - average by year

 
YearAverage resultSamples takenDetectionsRange of results
2014ND50ND
2015N/A00N/A
2016N/A00N/A
2017ND40ND
2018ND40ND
2019ND20ND

ppb = parts per billion

State and national drinking water standards and health guidelines

EWG Health Guideline 0.5 ppb

The EWG Health Guideline of 0.5 ppb for styrene was defined by the California Office of Environmental Health Hazard Assessment as a public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer.

EPA Maximum Contaminant
Level (MCL) 100 ppb

The legal limit for styrene, established in 1991, was based on a toxicity study in laboratory animals conducted in the 1970s. This limit may not fully protect against the risk of cancer due to styrene exposure.

ppb = parts per billion

All test results

Date Lab ID Result
2014-07-28160298ND
2014-07-28160299ND
2014-07-28160300ND
2014-07-28160301ND
2014-07-28160302ND
2017-07-24803103ND
2017-07-31808386ND
2017-07-31808388ND
2017-07-31808390ND
2018-03-06931679ND
2018-05-14970931ND
2018-08-201029042ND
2018-11-261081327ND
2019-02-251126145ND
2019-05-201158024ND