MOP & GLO Multi-Surface Floor Cleaner, Fresh Citrus Scent

Ingredients from the label

Directions from Packaging

TYPES OF FLOORS: Safe to use on tile, vinyl, hardwood, marble, linoleum, ceramic, and no wax floors. Not recommended for unsealed/worn wood or unsealed ceramic surfaces. Test in an inconspicuous area first and always follow manufacturer's instructions. DIRECTIONS: (Do not shake bottle) Before applying MOP & GLO®, sweep or vacuum the floor. 1. Squeeze out a small amount of MOP & GLO® directly onto floor. 2. Immediately use a damp mop, sponge or rag to spread product evenly over a 3'x4' area of the floor. 3. Rinse mop to remove dirt, move to the next area of the floor and repeat the process. Your floor will dry normally to a beautiful, long-lasting shine in 10-20 minutes. After floor is dry, apply additional coats if a higher gloss is desired. HELPFUL HINT If your floor shows signs of build-up or discoloration regularly remove the older layers of polish with the following process: mix 1/4 cup LYSOL® All-Purpose Cleaner (NON BLEACH CONTAINING) and add 1 cup ammonia in 1/2 gallon of warm water and spread over floor. (Do not mix bleach based products with ammonia, test in an inconspicuous area first.) If your sealed hardwood floor shows signs of build up remove the older layers of polish with a commercial floor stripper product suitable for your flooring, being sure to follow the manufacturer's recommendations and testing in an inconspicuous area first.

Warnings

KEEP OUT OF REACH OF CHILDREN / KEEP OUT OF REACH OF CHILDREN