Know Your Environment. Protect Your Health.

Styrene

Lake Delton Waterworks

Styrene is a volatile cancer-causing chemical used for manufacturing Styrofoam (polystyrene) and other plastics. Releases from industrial production sites and hazardous waste landfills cause styrene contamination in drinking water. Read More.

In addition to increasing the risk of cancer, styrene can also damage the liver and the nervous system. California set a public health goal for styrene in drinking water at 0.5 parts per billion. The federal Maximum Contaminant Level (MCL) allows up to 100 parts per billion of styrene in water, which is 200 times more than the California recommended level.

Click here to read more about carcinogenic VOCs.

 

16

Samples

0

Samples exceeding legal limit (MCL)

0

Samples exceeding
health guidelines

Testing results - average by year

 
YearAverage resultSamples takenDetectionsRange of results
2018N/A00N/A
2019ND30ND
2020ND70ND
2021ND10ND
2022N/A00N/A
2023ND50ND

ppb = parts per billion

State, National, and Health Guidelines for Drinking Water

EWG Health Guideline: 0.5 ppb

The EWG Health Guideline of 0.5 ppb for styrene was defined by the California Office of Environmental Health Hazard Assessment as a public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against cancer.

EPA Maximum Contaminant
Level (MCL): 100 ppb

The legal limit for styrene, established in 1991, was based on a toxicity study in laboratory animals conducted in the 1970s. This limit may not fully protect against the risk of cancer due to styrene exposure.

ppb = parts per billion

All test results

Date Lab ID Result
2019-06-191129378ND
2019-07-221135927ND
2019-12-101164822ND
2020-04-20409868ND
2020-05-28424672ND
2020-05-28424675ND
2020-05-28424681ND
2020-06-02426799ND
2020-06-02426789ND
2020-06-02426786ND
2021-01-20526112ND
2023-03-201301274ND
2023-03-201301276ND
2023-04-191316618ND
2023-04-201316620ND
2023-04-201316622ND