Product Type: floor finish

Product Form: liquid

Product pH: 7.0 - 7.50

Directions: Do not apply product if flooring and/or ambient temperature is less than 55F (13C). 1. No base coat is required. Build an adequate base by apply flour 4 uniform coats of Waxie-Green Floor Finish using the Waxie Fast Glide Finish system or any other appropriate finish mop. Allow adequate drying time between coats, typically 75 F (23c) and 50% relative humidity requires an average of 30-40 minutes. 2. For added depth of gloss and protection, an additional two or three coats may be applied after an initial 24 hour cure or base coats. 3. Burnishing or buffering between coats may be produce added coating clarity. Maintenance: Waxie Green Floor Finish- may be attacked or dulled by harsh cleaners. 1. Daily Dust mopping or sweeping will remove abrasive debris that will impact appearance and increase maintenance costs. 2. Damp mop or autoscrub using 1 oz/G of Waxie Green Cleanser. 3. Recommend using white, beige, or blue pads with a high speed butting machine (1500 rps or higher) and Waxie Green Floor Finish Enhancer diluted at 3-6 oz/g for floss restoration. 4. Deep scrub as required using a blue or green cleaning pad. Container Disposal: Rinse three times with water. Then offer for recycling or reconditioning or puncture and dispose of in a sanitary landfill (dump). Keep out of Reach of Children.

Disclosed on the bottle label: No ingredients were disclosed on the label.

Zinc and Calcium Free Formula, non-toxic, non flammable, solvent free, biodegradable, Meets Federal & State VOC Requirements. Waxie Green Floor Finish creates a new standard in floor finish technology. By combining an unequated level of environmental preference with unparalled performance, this green floor finishes durability surpasses other green and conventional floor finishes. Waxie- Green Floor Finish contains no fluorosurfacants, heavy metals, APE/APEO (alkyl phenol-----) surfacants, NPE (nonyl phenol ethnoxylates) PFOS and/or PFOA (perfluor-----) sulfonates and perfluor-----aicd. Ethylene glycol based ----, phthalates, styrene and its metabolites (styrene oxide), formaldehyde, polmers or urethane. This product meets Ecology Environmental Standard for Hard Floor Care Products (CCD-147) based on its low impact for human and environmental health.

First Aid Ingestion: Rinse mouth with water many times. Never give anything by mouth to an unconscious person. Contact physician if irritation persists. Skin: Flush skin with large amounts of water. If irritation persists, get medical attention. Inhalation: If inhaled, remove to fresh air. If not breathing give artificial respiration, preferably mouth-to-mouth. If breathing is difficult give oxygen. Get medical attention. Eyes: In case of contact immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists.