Ingredients from the label
What appears on the label: non-ionic and anionic surfactants
Text from the label
As it appears in the database
Warnings & Directions
Directions for Use:
Use on: Toilet bowl, outside of toilet, glazed ceramic tile, fiberglass, tubs, shower doors and vinyl curtains, sinks, counter tops and chrome fixtures. Note: Do not use on acrylic, brass, unsealed granite or marble. Spot test in an inconspicuous area for all other hard, non-porous surfaces. Shake well before and during use. Directions: 1. Spray 6 to 8 inches from surface to be cleaned. (approx. 1/2 oz.) 2. Watch as blue foam powers through soils and stains. 3. When foam turns white, just brush and flush. 4. For heavily soiled areas, repeated use or longer contact times may be required. For all other recommended surfaces when foam turns white, wipe with a wet cloth or sponge and rinse with water.
Caution:
CAUTION: CONTENTS UNDER PRESSURE. EYE IRRITANT. Read back panel carefully. / CAUTION: Contains non-ionic and anionic surfactants. Do not use or store near heat or open flame. Exposure to temperatures above 120ºF may cause bursting. Do not puncture or incinerate. Store in a cool dry place. KEEP OUT OF REACH OF CHILDREN AND PETS. Use in a well ventilated area. Avoid contact with eyes. If eye contact occurs, rinse eyes with water for 15 minutes. Remove contact lenses, if present, after first 5 minutes and continue rinsing. If irritation persists, seek medical attention.
Green Certifications
This product is not certified as a green cleaner by either Green Seal or EcoLogo.
Some products may carry other seals or symbols that are not verified by independent audits,
do not consider health impacts or are promoted by manufacturers rather than independent entities.
Animal Testing
Unknown:
Leading international certifiers PETA and Leaping Bunny have no information concerning this company’s use of animal testing.
