Ingredients from the label
What appears on the label: Water, Amphoteric and Nonionic surfactants, Sodium citrate, Sodium carbonate, Colorant
Text from the label
As it appears in the database
Warnings & Directions
Directions for Use:
READ BEFORE USE. Before you begin, always wear eye protection. *Saturate plants, shrubs and grass with water. Keep others and animals away from work site. Test pressure washer for surface compatibility, with and without cleaner, on an inconspicuous area. Rinse and allow test surface to dry before proceeding. IMPORTANT: It is best to pressure wash under cooler, non-windy conditions. Do not allow cleaner to dry on surface before rinsing. Product may not be compatible with all asphalt sealers - test first Do not pressure wash deteriorated painted, sealed or stained surfaces unless you intend to refinish. Pressure washing may remove old paint and stains, and should be tested prior to full application. For vertical surfaces, solution should be applied from the bottom up, and rinsed from the top down to prevent streaking.
APPLICATION DIRECTIONS: Put pressure washer siphon tube into solution. Use low-pressure spray nozzle to apply solution. Remove the siphon tube from the container. Rinse with high-pressure nozzle, keeping tip at least 2 feet from the surface. *After cleaning, rinse and again saturate exposed plants, shrubs and grass with water. Before equipment storage, flush pressure washer with water thoroughly and rinse equipment exterior. For extremely light soils, pre-dilute this product 50/50 with water and follow all instructions above.
Manual Cleaning: Mix 1-measure of Simple Green with 10-measures of water (example: add 2 Cups Simple Green to 1 gallon + 1 quart of water.) *Saturate plants, shrubs or lawn with water around section to be cleaned. Clean in sections using a soft bristle brush. Do not allow cleaner to dry on surface before rinsing. Rinse with garden hose at highest pressure. Move to new section and repeat.
Caution:
KEEP OUT OF REACH OF CHILDREN.
WARNING: Causes serious eye irritation.
Wash hands thoroughly after handling. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. Refer to Safety Data Sheet for more information
HANDLING & STORAGE: Use eye protection (glasses, goggles). Keep container closed until ready for use. Store between temperatures of 40F - 111F (4.4C - 44C.) Rinse empty container and offer for recycling.
RESPONSIBLE USE: I is a violation of clean water legislation to dump or flush cleaning rinses into storm drains or open bodies of water. Allow cleaning solution to fall on grassy, dirt, or gravel areas and water it in. SEPTIC SAFE.
Product versions
Manufacturers frequently make changes to their product ingredients, formulations or labeling, and older versions may still be on store shelves or in your home. When possible, EWG's Guide rates all available versions. It's important to read the label every time you shop, even though many labels don't offer complete information.
Top scoring factors: Corrosive; May contain ingredients with potential for Government enforceable restrictions; cancer; digestive system effects
Top scoring factors: May contain ingredients with potential for Government enforceable restrictions; digestive system effects; nervous system effects
Animal Testing
Unknown:
Leading international certifiers PETA and Leaping Bunny have no information concerning this company’s use of animal testing.